Cement Finish Underlayment - Ardex Feather Finish 10 lbs
Description
This self-drying cement-based finish underlayment from Ardex, called Feather Finish, is expertly designed to provide a smooth, durable surface for your flooring needs. Made with advanced technology, it dries quickly, allowing you to finish your project faster. With Ardex, you can achieve a flawless finish with ease.
- 10 lbs per bag
- Creates a smooth, even surface for floor coverings over various substrates.
- Allows floor coverings to be installed in as little as 15 minutes.
- Offers outstanding bond strength for reliable performance.
- Backed by the ARDEX L.P. Standard Limited 10-Year Warranty.
ARDEX Feather Finish specs
- Use: interior, dry areas only. Skim coats, patches and smooths concrete, plywood, solid hardwood, gypsum and other approved substrates before sheet vinyl, VCT and other floor coverings.
- Thickness: from a true featheredge up to 1/2" (12 mm).
- Mixing: 2-1/2 quarts (2.4 L) of clean water per 10 lb bag; for small batches, 2 parts powder to 1 part water by volume. Do not overwater.
- Pot life: 15–20 minutes at 70°F.
- Floor covering: typically 15–20 minutes at 70°F, once hardened. Wait 16 hours before wood flooring or epoxy and urethane adhesives.
- Coverage per 10 lb bag: 100–300 sq ft as a skim coat, about 33 sq ft at 1/8", about 17 sq ft at 1/4".
- Minimum substrate and air temperature: 50°F. Not a wear surface and not a vapor barrier.
Ardex Feather Finish FAQ
What is Ardex Feather Finish used for?
Smoothing and patching interior subfloors before new flooring goes down: skim coating concrete or plywood, filling low spots and feathering edges so the floor covering sits flat.
How soon can I install flooring over it?
Usually 15–20 minutes at 70°F, once it has hardened. ARDEX says to wait 16 hours before wood flooring or epoxy and urethane adhesives. Cool or humid conditions slow drying.
How much does one 10 lb bag cover?
100–300 sq ft as a thin skim coat, about 33 sq ft at 1/8" and about 17 sq ft at 1/4". Rough surfaces use more.
Do I need a primer?
Not for most applications. ARDEX calls for a primer on gypsum, very absorbent concrete, metal and epoxy floors, so check the ARDEX technical data sheet for your substrate, or ask us.
Questions about your subfloor? Call or text (808) 210-4807, or visit our Honolulu showroom. See more flooring installation supplies.
