What is a metallic epoxy floor? It is a poured epoxy floor with metallic pigment mixed in, so the colors swirl and blend like stone or liquid metal. Every floor comes out different. On bare concrete, STAUF USA's DCS metallic system is four coats: EHS-265 primer, a tinted ERP-270 base coat, CCI-610 epoxy mixed with metallic pigment, and a UPS-670 gloss or UPS-675 matte top coat. Below: each step with a drawing, color tips from STAUF, and a materials list for 500 sq ft.

Price your metallic floor →
In the calculator, choose "Metallic (special order)".

Special order, 2–3 weeks. The metallic pigments, the 32 fl oz base-coat tints and the 5-quart CCI-610 accent kits are ordered for your job; we confirm their price with your quote. STAUF's step-by-step guide: DCS Metallic Flooring Installation Guide (PDF).

Before you start

  • Make a sample first. STAUF strongly suggests a sample board, because different base coat colors and pigment colors give different results.
  • Check the slope. The metallic coat goes on thick and keeps moving while it cures, so it travels toward the lowest part of the floor. Garages usually slope to the door. Tell the owner before you start.
  • Floor drains: cover with tape and cut around the edges before any epoxy. STAUF's tip: make a tall tape loop on top so you can find the drain later.
  • Baseboards: best removed before grinding; otherwise tape the walls at floor level.

What you need

  • STAUF EHS-265 Hydro-Seal primer.
  • STAUF ERP-270 Perma-Seal base coat, about 175 sq ft per 2.5-gal kit with a #10 trowel (about 70 sq ft per gallon). It is also STAUF's moisture vapor barrier, rated for 25 lb or 100% RH.
  • XCF ColorFast tint, 32 fl oz: one per 2.5-gal ERP-270 kit, in your base color. STAUF's first choice is Jet (black): it gives the floor depth and works under every metallic color. Gun Metal or Fog also work, and Sand can go under brown tones. Jet, Gun Metal and Sand are special order, we confirm the price; we stock #11 Fog.
  • STAUF CCI-610 Summit 2.5-gal kits for the main metallic color, about 125 sq ft per kit (50 sq ft per gallon).
  • CCI-610 5-quart kits for the accent colors (special order, we confirm the price).
  • Metallic pigment, 12 oz containers: one per 2.5-gal CCI-610 kit, and one split between two 5-quart kits (special order, we confirm the price). See all pigment colors.
  • UPS-670 (gloss) or UPS-675 (matte) top coat, about 400 sq ft per gallon.
  • EFP-290 Epoxy Floor Patch for cracks, holes and spalls. For joints STAUF makes DJF-60 joint filler (ask us).
  • Tools: concrete grinder, vacuum, brush and mini roller, #10 notched trowel, squeegee or notched trowel and roller for the metallic coat, a magic trowel or a roller with blocked ends for blending, a floor buffer with 100-grit sanding screens, acetone and a microfiber mop.

Step by step: how to install a metallic epoxy floor

  1. Prep the concrete. Grind to remove paint, drywall mud and other contaminants. You need a clean, porous surface, not an aggressive grind. Vacuum and sprinkle water drops: if they soak in within 60 seconds, you have porosity; if not, grind a little more. Patch cracks, pops and spalls flush with EFP-290 (dries in about four hours). For joints, insert backer rod, leave about ½" open on top, and fill with DJF-60.
    Step 1: a grinder opens up the concrete; a water drop soaks in within 60 seconds 1Grind and patchconcrete slabwater drop soaksin within 60 s
    Porosity test: water drops should soak in within 60 seconds.
  2. Prime with EHS-265. Mix A and B for 3 minutes (milky white). Cut in the edges with a brush and mini roller, then roll and cross-roll in about 5 × 5 ft sections, keeping a wet edge. It dries clear. Let it dry completely. The primer soaks partly into the porous concrete and locks down, so the colored coats stay on top. STAUF: EHS-265 is always the first coat over concrete, even when ERP-270 follows.
    Step 2: a roller applies the EHS-265 primer over the ground concrete 2Prime with EHS-265concrete slabroll, then cross-rollEHS-265 primer
    Roll and cross-roll; milky white when wet, clear when dry.
  3. Trowel the tinted ERP-270 base coat. Add the 32 fl oz tint bottle (STAUF's first choice: Jet, black) while you mix each 2.5-gal kit, then spread with a #10 trowel (about 175 sq ft per kit). Let it cure fully, 12–18 hours. Then sand with 100-grit screens on a floor buffer, vacuum well, wipe with acetone on a microfiber mop, and let the acetone evaporate.
    Step 3: the tinted ERP-270 base coat is spread with a #10 notched trowel 3Tinted ERP-270 base coatconcrete slabnotched trowelERP-270 base coat (tinted)
    Base coat and pigment colors both change the final look (STAUF): make a sample.
  4. Pour the metallic coat. Divide the CCI-610 into containers and mix in the pigment: about 4 oz per mixed gallon, or one 12 oz container per 2.5-gal kit. Stir-stick check: dip a stick and pull it straight up. If you can't see the stick through the epoxy, there is enough pigment; if you can, add more and mix again. Easiest method for a first floor: cover the whole floor with the main color using a squeegee or notched trowel and back roll it, about 50 sq ft per gallon (125 sq ft per kit). Then place the lighter accent colors on top and blend them with a magic trowel, or a roller with blocked ends that pushes the colors instead of rolling. The coat hardens in about 12 hours and keeps blending on its own while it does, so it won't look exactly like you left it.
    Step 4: CCI-610 mixed with metallic pigment is poured, main color first, then lighter accents 4Metallic coat: main + accentsconcrete slabmain color first,then accentsCCI-610 + metallic pigment
    Main color over the whole floor first, then accents on top, blended while wet.
  5. Sand and top coat. Sand the metallic coat with a 100-grit screen, vacuum, wipe with acetone and let it flash off completely. Then dip and roll UPS-670 for gloss or UPS-675 for matte at about 400 sq ft per gallon, in long even passes that overlap, cross-rolling wall to wall as you go. UPS-675 mixing, per STAUF: mix A and B 3 minutes, rest 15 minutes, mix 1 minute, then roll. The cured top coat has an orange-peel texture.
    Step 5: after sanding, the UPS-670 gloss or UPS-675 matte top coat is rolled on 5UPS top coatconcrete slabroll, then cross-rollUPS-670 / UPS-675
    Long overlapping passes, cross-rolled wall to wall.

All of these STAUF coatings are two-part products. Read each data sheet for mixing, working time, and temperature and humidity limits before you start.

The layers, from the floor up

Cross-section of a STAUF metallic epoxy floor: ground concrete, EHS-265 primer, tinted ERP-270, CCI-610 with metallic pigment, UPS top coat top (you walk here)UPS-670 gloss / UPS-675 matteCCI-610 + metallic pigmentERP-270, tintedEHS-265 primerConcrete slab, groundbottom
STAUF's DCS metallic system, per its coatings director: EHS-265, ERP-270 tinted, CCI-610 with metallic pigment, UPS-670 or UPS-675.

Metallic epoxy colors: what works

Most metallic floors use more than one color, although single-color floors look great too. STAUF's advice: a darker main color with lighter accents gives the best contrast. The combinations its customers pick most:

  • Brown tones (any mix): P1140 Hammock, P1150 Shipwreck, P1170 Sandal, P1155 Tiki.
  • Silver floors: P1050 Caviar as the base, with P1020 Dolphin and P1030 Manatee.
  • Blue tones (they look great over a black or gray base coat): P1620 Maui, P1650 Ocean, P1610 Caribbean.

Base coat color: STAUF's first choice is Jet (black) under every metallic floor; it gives the colors depth. Gun Metal or Fog also work, and Sand can go under brown tones.

Steer away from very light floors. Light colors can amber in UV light. A darker metallic floor keeps its look longer. All pigment colors: Torginol metallic pigments. Screens are only a guide; make a sample.

AI rendering of a metallic epoxy floor in STAUF pigments Caviar P1050 (base) and Dolphin P1020
Caviar P1050 base + Dolphin P1020
AI rendering of a metallic epoxy floor in STAUF pigments Manatee P1030 (base) with a Maui P1620 accent
Manatee P1030 base + Maui P1620 accent
AI rendering of a metallic epoxy floor in STAUF pigments Maui P1620 (base) with a Manatee P1030 accent
Maui P1620 base + Manatee P1030 accent
AI rendering of a brown-tone metallic epoxy floor in STAUF pigments Shipwreck P1150 and Tiki P1155
Shipwreck P1150 + Tiki P1155 (brown tones)

Color concepts: AI renderings by STAUF USA to show these pigment combinations. Not photos of installed floors; real floors vary.

What a 500 sq ft metallic floor needs

This is how STAUF's coatings director built a 500 sq ft metallic order: enough 2.5-gal CCI-610 to cover the whole floor in the main color, plus two 5-quart kits for accents. Prices are ours on 20 Nov 2026; special-order items are priced with your quote. Our calculator gives the same list for your size.

Product Qty Total
EHS-265 primer, 2.5-gal kit 1 $342.42
ERP-270 base coat, 2.5-gal kit (175 sq ft per kit) 3 $1,203.30
XCF tint, 32 fl oz, Jet (black) or your base color (1 per ERP-270 kit) 3 special order, we confirm the price
CCI-610, 2.5-gal kit, main color (125 sq ft per kit) 4 $1,496.08
CCI-610, 5-quart kit, accent colors 2 special order, we confirm the price
Metallic pigment, 12 oz (1 per 2.5-gal kit + 1 for the two 5-qt kits) 5 special order, we confirm the price
UPS-670 gloss kit (A+B) or UPS-675 matte 2 $358.56
Subtotal, priced items $3,400.36
Hawaii GET 4.712% $160.22
Total, priced items $3,560.58

The gloss price is shown; UPS-675 matte is $188.52 per kit. EFP-290 and DJF-60 for repairs are extra. Prices change; send your calculator result to us for a confirmed quote.

Which STAUF product goes where

Follow each floor in order, 1 to 7: that is the order you apply them. Same color = same product.

1Patch
2Primer
3Body / color coat
4Tint
5Decoration
6Top coat
7Final coat
Garageconcrete
1 PatchEFP-290Epoxy floor patchcracks, holes, spalls
2 PrimerEHS-265Epoxy primer800 sq ft / kit
3 Body / color coatCCI-610Epoxy body coat500 sq ft / kit
4 TintXCF #11 FogGray tint32 oz per CCI kit
5 DecorationXPFFlakes, full cover200 sq ft / box
6 Top coatCCO-651Polyurethane top coat480 sq ft / kit
7 Final coatUPS-670 / 675*Gloss / matte sealerup to 400 sq ft/gal
Commercial kitchenconcrete
1 PatchEFP-290Epoxy floor patchcracks, holes, spalls
2 PrimerEHS-265Epoxy primer800 sq ft / kit
3 Body / color coatULC-500LevelSeal body coat100 sq ft / kit
4 TintXCF #11 FogGray tint2 oz per ULC kit
5 DecorationXPFFlakes, full cover200 sq ft / box
6 Top coatCCO-651Polyurethane top coat480 sq ft / kit
7 Final coatUPS-670 / 675*Gloss / matte sealerup to 400 sq ft/gal
Bathroom / any tileexisting tile
1 PatchEFP-290Epoxy floor patchbroken tiles
2 PrimerERP-270 + sandPrimer + moisture barrier175 sq ft / kit
3 Body / color coatULC-500LevelSeal body coat100 sq ft / kit
4 TintXCF #11 FogGray tint2 oz per ULC kit
5 DecorationXPFFlakes, full cover200 sq ft / box
6 Top coatCCO-651Polyurethane top coat480 sq ft / kit
7 Final coatUPS-670 / 675*Gloss / matte sealerup to 400 sq ft/gal
Plywoodbare subfloor
1 PatchEFP-290Epoxy floor patchscrew holes, seams
2 PrimerEHS-265 × 2Epoxy primer, 2 coats800 sq ft / kit per coat
3 Body / color coatULC-500LevelSeal body coat100 sq ft / kit
4 TintXCF #11 FogGray tint2 oz per ULC kit
5 DecorationXPFFlakes, full cover200 sq ft / box
6 Top coatCCO-651Polyurethane top coat480 sq ft / kit
7 Final coatUPS-670 / 675*Gloss / matte sealerup to 400 sq ft/gal
Metallicconcrete
1 PatchEFP-290Epoxy floor patchcracks, holes, spalls
2 PrimerEHS-265Epoxy primer800 sq ft / kit
3 Body / color coatERP-270Base coat, #10 trowel175 sq ft / kit
4 TintXCF Jet (black), 32 ozBase tint, special order (STAUF 1st choice)1 per ERP kit
5 DecorationCCI-610 + pigmentMetallic coat (pigment: special order)125 sq ft / kit + 12 oz pigment per kit
6 Top coatno flakes,
no CCO-651
7 Final coatUPS-670 / 675Gloss / matte, the only top coatup to 400 sq ft/gal
  1. 1Tile → ERP-270 primer. Everything else → EHS-265.
  2. 2Rigid concrete garage → CCI-610 body coat. Anything that moves, or a kitchen (tile, plywood, kitchen slab) → ULC-500.
  3. 3Every flake floor → XPF flakes + CCO-651.
  4. 4UPS-670 / UPS-675 = optional last coat on flake floors, for a smoother finish. On metallic it is the only top coat.

* Flake floors: UPS-670/675 is optional. STAUF (20 Nov 2026): one CCO-651 coat gives a shiny, textured floor; add UPS for a smoother finish. Coverage is approximate, per kit or box, before the ~10% extra our calculator adds. EFP-290: as much as the repairs need. Kit sizes: EHS-265, ERP-270, CCI-610 2.5 gal; CCO-651 2 gal; XPF 25-lb box. Sources: STAUF USA (system recipes, coatings director's rates), STAUF data sheets and the DCS metallic guide. Best Flooring Honolulu, 20 Nov 2026.

The rest of the series

Where to get the materials on Oahu

Best Flooring Honolulu is STAUF's exclusive distributor in Hawaii. We order the metallic pigments and accent kits for your job and you pick up at our Waipio warehouse, or we ship to all islands. See every STAUF product and the epoxy flooring collection. Call or text (808) 210-4807.

FAQ: metallic epoxy floors

How do you do a metallic epoxy floor?

On ground, bare concrete: prime with EHS-265, trowel a tinted ERP-270 base coat with a #10 trowel, sand it, pour CCI-610 epoxy mixed with metallic pigment for the main color, add lighter accent colors and blend them, then sand and roll a UPS-670 gloss or UPS-675 matte top coat. That is STAUF's DCS metallic system.

How much metallic pigment do I need?

STAUF sells metallic pigment in 12 oz containers. One container tints a 2.5-gallon kit of CCI-610; STAUF's guide suggests about 4 oz of pigment per mixed gallon. One container can be split between two 5-quart accent kits. For 500 sq ft, STAUF's coatings director planned 5 containers.

Can you do a metallic epoxy floor in a sloped garage?

Yes, but plan for it. The metallic coat goes on thick and keeps moving for about 12 hours, so it flows toward the lowest part of the floor. Most garages slope to the door. STAUF says to tell the owner before installing.

What colors work best for a metallic epoxy floor?

A darker main color with lighter accents gives the most contrast. STAUF's popular combinations are brown tones (P1140 Hammock, P1150 Shipwreck, P1170 Sandal, P1155 Tiki), silver floors (P1050 Caviar base with P1020 Dolphin and P1030 Manatee) and blue tones (P1620 Maui, P1650 Ocean, P1610 Caribbean). STAUF's first choice for the base coat is Jet (black); Gun Metal or Fog also work. Avoid very light floors: light colors can amber in UV light.

Gloss or matte for a metallic floor?

Both use the same steps. UPS-670 gives a gloss finish and UPS-675 a matte finish, rolled at about 400 sq ft per gallon. Either way the cured top coat has an orange-peel texture.

Can a metallic epoxy floor go over tile or plywood?

STAUF's metallic guide is written for ground concrete. For a metallic floor over tile or plywood, call or text us at (808) 210-4807 first.

Sources: STAUF USA coatings director (metallic system, rates, pigment and colorant sizes, color advice, 500 sq ft build, review; 19–20 Nov 2026) and the STAUF DCS Metallic Flooring Installation Guide. Updated 20 Nov 2026.

November 20, 2026 — Best Flooring Honolulu

Leave a comment

Please note: comments must be approved before they are published.