Epoxy Floor Calculator – How Much Epoxy Do You Need?
How much epoxy do you need for your floor, and what will it cost? Answer six quick questions and this calculator lists the STAUF flake-floor materials for your space, over bare concrete or over existing tile: primer, body coat, flakes and top coat, with quantities, Oahu prices and a total with Hawaii GET. It uses the coverage rates STAUF's coatings team gave us for the STAUF flake system. Send the estimate to us and we'll check it and confirm a final quote.
1. What floor is it?
2. What is on the floor now?
Over tile, STAUF uses a different system: ERP-270 Perma-Seal, ULC-500 LevelSeal, flakes and the CCO-651 top coat.
3. How big is it?
Enter total square feet, or width × length in feet. Add a second area (for example a workshop next to the garage) and we add them up.
4. Flake color (STAUF XPF)
Screen colors are only a guide. Ask to see a flake sample at our Nimitz showroom before you order.
5. Tinted base coat?
6. Finish
Textured gloss = one top coat over the flakes. Smooth finishes add a STAUF UPS sealer coat on top.
The STAUF flake floor system
For garages, basements, shops and other concrete floors, STAUF builds the flake floor in layers:
- STAUF EHS-265 Hydro-Seal water-based epoxy primer
- STAUF CCI-610 Summit epoxy body coat, clear or tinted with XCF ColorFast #11 Fog
- A full broadcast of STAUF XPF polymer flakes into the wet body coat
- STAUF CCO-651 polyurethane top coat for flake floors
- Optional smooth finish: UPS-670 gloss or UPS-675 matte sealer
Over existing tile, STAUF uses a different system:
- STAUF ERP-270 Perma-Seal epoxy primer and sealer
- STAUF ULC-500 LevelSeal urethane body coat
- A full broadcast of STAUF XPF polymer flakes
- STAUF CCO-651 polyurethane top coat
- Optional smooth finish: UPS-670 gloss or UPS-675 matte sealer
See all epoxy floor coatings and STAUF products.
Epoxy floor calculator FAQ
How much epoxy do I need per square foot?
For the body coat, this calculator plans one 2.5-gal STAUF CCI-610 kit per 475 sq ft (about 190 sq ft per gallon), the rate STAUF's coatings team gave us for flake floors. The STAUF data sheet lists up to 200 sq ft per gallon at 8 mil with a 3/8-inch nap roller. For the EHS-265 primer we plan about 300 sq ft per gallon (data sheet: up to 320), and for the CCO-651 top coat about 200 sq ft per gallon (data sheet: up to 300 on rough flake surfaces).
How many boxes of flakes do I need?
For a full broadcast we plan about 0.15 lb of STAUF XPF flakes per sq ft, so one 25-lb box covers roughly 165 sq ft. A 400 sq ft garage needs 3 boxes; 660 sq ft needs 4.
Gloss or matte: what is the difference?
The standard finish is textured gloss: the CCO-651 top coat over the flakes, which keeps the flake texture. For a smoother surface, add a coat of STAUF UPS-670 (gloss) or UPS-675 (matte) sealer on top.
Do I need a primer?
Yes. In the STAUF system for concrete the first layer is EHS-265 Hydro-Seal, a water-based epoxy primer. It is a primer, not a moisture barrier. For a damp slab, STAUF's moisture barrier is ERP-270 Perma-Seal; test the slab before you choose.
Can you put epoxy over existing tile?
Yes. STAUF's system over tile is ERP-270 Perma-Seal, then ULC-500 LevelSeal, then flakes and the CCO-651 top coat. The tile must be well bonded, clean and de-glossed. Call or text (808) 210-4807 to confirm your floor.
Can I do it myself?
You can buy the STAUF materials from us for your own project. They are two-part products with short working times (about 25 minutes pot life for CCI-610 and about 45 minutes for EHS-265 at 70°F), and STAUF lists installation between 50–90°F and 30–80% relative humidity. Read each product's data sheet first, and call or text (808) 210-4807 with questions.
How long does it take to cure?
From the STAUF data sheets: EHS-265 primer dries in about 2 hours (or until clear), the CCI-610 body coat dries in 12–18 hours and is completely hardened after 7 days, the CCO-651 top coat dries in about 4 hours, and the UPS-670 sealer dries in 2–12 hours.
